The 6200 will cut practically every type and density of roll stock material accurately, cleanly and quickly right from the master roll without rewinding. The 6200 is a heavy duty, automatic, single knife roll slitter designed to provide dependable long term performance in continuous production environments. It's new design provides better performance and reduced maintenance requirements.

The Model 6200 can automatically slit a wide variety of materials such as: tape, foam, foil, film, laminates, rubber, fabric, nonwovens, paper and cork on rolls with a maximum outside diameter of 20" on a variety of core sizes.

The Model 6200 features user-friendly PLC (Programmable Logic Control) operation with touch screen selection of slit widths and roll cut count in inches and millimeters, as well as dwell time at the grinder and core. It also features two independent 5 HP AC inverter drives for the knife and chuck. A servomotor powered lead screw provides precise cutting tolerances of +/- .003".

Features:

• New, Improved Design Minimizes Maintenance Requirements
• Heavy Duty Construction For Reliable, Long-Term Performance
• Fast, Simple Machine Set-up
• PLC Controlled Operation
• Touch Screen Selection of Slit Widths, Roll Cut Count, And Dwell Time at the Grinder & Core
• Servo-motor Driven Ball Screw For Fast, Accurate Spacing
• Variable Speed AC Inverter Drives for Chuck & Knife
• Hydraulically Activated Knife Penetration For Smooth Cutting Operation

• Simple Blade Installation & Removal
• Automatic Blade Sharpening & Interval Grinding
• High Efficiency Motors
• Three Way Cutting: Driven Blade, Free-Wheeling Blade or Locked Blade
• Two Direction Mandrel Rotation
• Built-In Leveling Plates
• Partial & full safety guard options
• Variety of Chuck Options
• Adjustable Knife Cutting Angle Option
• Electronic Drag Brake Option

Electrical Requirements:

230 V., 30A., 3 P.H., 60Hz*

Air Requirements:

2 SCFM @ 80 PSI

Maximum Roll Diameter:

20" (508mm)

Maximum Roll Width:

90" (2286mm)

Minimum Core Diameter:

1" (25.4mm)

Chuck Motor

5.0 HP Variable Speed

Knife Motor

5.0 HP Variable Speed

Grinding Motor

0.5 HP