The LS-7000 has all the features of the LS-6200, in addition to the capability to slit rolls with a maximum outside diameter of 23” (584 mm) on a variety of core sizes.

The Lever 7000 features user-friendly PLC (Programmable Logic Control) operation with touch- screen selection of slit widths and roll cut count in inches and millimeters, as well as dwell time at the grinder and core. It also features two independent 5 HP AC inverter drives for the knife and chuck. A servomotor powered lead screw provides precise cutting tolerances of +/- .003".

Features:

• New, Improved Design Minimizes Maintenance Requirements
• Heavy Duty Construction for Reliable, Long-Term Performance.
• Fast, Simple Machine Set-up.
• PLC Controlled Operation.
• Touch Screen Selection of Slit Widths, Roll Cut Count, And Dwell Time at the Grinder & Core.
• Servo-motor Driven Ball Screw For Fast, Accurate Spacing.
• Variable Speed AC Inverter Drives for Chuck & Knife.
• Hydraulically Activated Knife Penetration For Smooth Cutting Operation.

• Simple Blade Installation & Removal.
• Automatic Blade Sharpening & Interval Grinding.
• High Efficiency Motors.
• Three Way Cutting: Driven Blade, Free-Wheeling Blade or Locked Blade.
• Two Direction Mandrel Rotation.
• Built-In Leveling Plates.
• Partial & Full Safety Guard Options.
• Variety of Chuck Options.
• Adjustable Knife Cutting Angle Option-Manual or Automatic
• Electronic Drag Brake Option

Electrical Requirements:

230 V., 15A., 3 P.H., 60Hz*

Air Requirements:

2 SCFM @ 80 PSI

Maximum Roll Diameter:

23" (584 mm)

Maximum Roll Width:

90" (2286 mm)

Minimum Core Diameter:

1.0" (25.4 mm)

Chuck Motor:

5.0 HP Variable Speed

Knife Motor:

5.0 HP Variable Speed

Grinding Motor:

0.5 HP