The 1500 is a heavy duty, automatic, single knife roll slitter designed to provide dependable long term performance in continuous production environments. It's new design provides better performance and reduced maintenance requirements.

The LS 1500 features user-friendly PLC (Programmable Logic Control) operation and a menu driven operator interface for selection of slit widths in inches and millimeters, dwell time at the grinder and core, and interval grinding. It also features batch cutting, cut counter, home position, and two independent 3 HP AC inverter drives for the knife and chuck. A servomotor powered lead screw provides precise slitting tolerances of +/- .003".

The LS 1500 includes a complete machine safety guard with easy-access for set-up and maintenance. It can automatically slit a wide variety of materials such as: tape, foam, foil, film, rubber, fabric, nonwovens, paper and cork on rolls with a maximum outside diameter of 15" on a variety of core sizes.

Features:

• New, Improved Design Minimizes Maintenance Requirements
• Heavy Duty Construction For Reliable, Long-Term Performance
• Fast, Simple Machine Set-up
• PLC Controlled Operation.
• Menu driven keypad for Selection of Slit Widths, Roll Cut Count, And Dwell Time at the Grinder & Core
• Servo-motor Driven Ball Screw For Fast, Accurate Spacing
• Variable Speed AC Inverter Drives For Chuck & Knife
• Hydraulically Activated Knife Penetration For Smooth Cutting Operation

• Simple Blade Installation & Removal
• Automatic Blade Sharpening & Interval Grinding
• High Efficiency Motors
• Three Way Cutting: Driven Blade, Free-Wheeling Blade or Locked Blade
• Two Direction Mandrel Rotation
• Built-In Leveling Plates
• Partial & Full Safety Guard Options
• Variety of Chuck Options
• Adjustable Knife Angle Option
• Electronic Drag Brake Option

Electrical Requirements:

230 V., 30A., 3 P.H., 60Hz*

Air Requirements:

2 SCFM @ 80 PSI

Maximum Roll Diameter:

15" (381mm)

Maximum Roll Width:

90" (2286mm)

Minimum Core Diameter:

1.0" (25.4mm)

Chuck Motor:

3.0 HP Variable Speed

Knife Motor:

3.0 HP Variable Speed

Grinding Motor:

0.5 HP